Xerox 4500 ps eth 用户手册

This chapter provides instructions as to the configuration of Novell
NetWare to connect the  PrintServer using the IPX/SPX protocol.

The PrintServer is able to run with NetWare v.3.1x in BINDERY
emulation as well as v.4.xx  (the latter being backwards compatible) in
Directory Services (DS) or BINDERY emulation.

The PrintServer supports printing through an embedded PSERVER
(EPS) fully emulating a standard NetWare PSERVER.NLM.
Printing through the embedded NPRINTER (ENP) can also be
performed. Up to two ENPs is supported.
The Novell NetWare protocols supported are: SPX, SAP, NCP and IPX.

The NetWare set-up consists of the following basic steps:

• 

Check the pre-requisites (described in the section “Before you
begin” in the following).

• 

Check that the connection with the NetWare server has been
established by printing a file e.g. from a NetWare connected client.

The following sections will guide you through the configuration of the
Novell NetWare for IPX/SPX printing on the  PrintServer using standard
NetWare tools.