Xerox 4520 用户手册

L o a d i n g P a p e r

C h a p t e r 2 : H a n d l i n g P a p e r

❖

2-29

Figure 2.15 illustrates the envelope orientation needed to

print COM-10, DL, or C5 envelopes.

Figure 2.15 Loading envelopes

Adjust the guides to the desired envelope size.

Make sure that they are snug against both sides of the

envelope but not too tight as to buckle it.

Insert only one envelope at a time into the SBF.

For best performance:

— Stand facing the SBF straight on.

— Insert the envelope (refer to Figure 2.15), guided by

the side guides, at a steady rate.

— Continue to insert the envelope until its lead edge

makes contact and a slight buckle forms. Apply

pressure first on one side of the envelope and then the

other so that the lead edge makes full contact.

— Maintain slight pressure on the envelope until the

printer begins to pull in the envelope.

To print envelopes, use the

high-capacity envelope feeder

(HCEF), SBF

, or

MBF

only.

Loading

Envelopes

Note

WUG-CH02 Page 29 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM