Xerox 1150 用户手册

82  Chapter 6

ENWW

Choose the item that best describes the problem:

●

●

●

●

Garbled, incorrect, or 
incomplete text

The parallel or USB cable might be loose or defective. Try the 
following:

●

Disconnect the cable and reconnect it at both ends.

●

Try printing a job that you know works.

●

If possible, attach the cable and printer to another 
computer, and try printing a job that you know works.

●

Try using a new IEEE-1284 compliant parallel or USB 
cable. See 

. 

The wrong printer driver might have been selected when the 
software was installed. Make sure that the HP LaserJet 1150 
or HP LaserJet 1300 is selected in the printer properties.

There might be a problem with your software application. Try 
printing from another software application.

Missing graphics or text, or 
blank pages

●

Make sure that your file does not contain blank pages.

●

The sealing tape might still be in the print cartridge. 
Remove the print cartridge, and pull out the sealing tape. 
Reinstall the print cartridge. See 

 for instructions. To check the printer, print a 

demo page by pressing the Go button.

●

The graphic settings in the printer properties might not be 
correct for the type of job that you are printing. Try a 
different graphic setting in the printer properties. See 

 for more information.

●

The printer driver might not work for the type of job that 
you are printing. Try using a different printer driver 
(software), such as the printer driver for the 
HP LaserJet III.

If you use a different printer driver, you will lose access to 
some product features.