Epson LX-300 用户手册
Using the Control Panel
You can control simple printer operations—such as line feeding,
form feeding, loading and ejecting paper, and selecting
fonts—with the buttons on the control panel. The control panel
lights show the printer’s status and the current font.
form feeding, loading and ejecting paper, and selecting
fonts—with the buttons on the control panel. The control panel
lights show the printer’s status and the current font.
Lights and buttons
PAUSE
light
The orange
PAUSE
light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly and the
beeper sounds four times. When the printer is out of paper, the
light flashes and the beeper sounds three times. The light also
flashes when you can tear off the last sheet at the edge of the
printer cover.
beeper sounds four times. When the printer is out of paper, the
light flashes and the beeper sounds three times. The light also
flashes when you can tear off the last sheet at the edge of the
printer cover.
The
PAUSE
light goes on and the beeper sounds five times if an
error occurs.
FONT 1 and FONT 2 lights
The green
FONT
lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
FONT button
Press the
FONT
button during normal operation to cycle through
the printer fonts listed on the control panel. When you press the
button, the
button, the
FONT
lights change to indicate your current selection.
For more about choosing a font, see page 2-4.
Pause
LF/FF
Font
Paper Park
Micro Adjust
1
2
Roman
Sans Serif
D r a f t
Draft Condensed
3sec
BB2-01
L
Blueberry REV.F
A5 size
Chapter 2
95/05/25
2-2
Using the Printer