Emulex NQGB-NT+ 用户手册

  

1)  When the printer server is powered up, the green POWER LED and the 

yellow PORT LED will illuminate. 

2)  Wait 15 to 20 seconds after power is applied. 

During this time, the printer server is performing its self-test. 

3)  When the printer server passes its self-tests, the yellow PORT LED will 

go out.  If the printer server does not pass, the yellow PORT LED will 
flash alternately with the green POWER LED. 

4)  If the network is active, the yellow LAN LED will flash with network 

activity. 

5)  If the UTP connector is used, the green LINK LED will illuminate. 

6)  If the BNC connector is used, the green LINK LED will not illuminate. 

7)  If any of the connected peripheral ports is active, the yellow PORT LED 

will flash showing port activity. 

Status
Button

Power

Link

LAN

Port