Emulex NP02 用户手册
![Emulex](https://files.manualsbrain.com/attachments/a9f06904df68a16969329cee0d321b3316fb4c39/common/fit/150/50/630eec64b37fa4951c28d41e544ee407b01af1301ac246d0d1b2a6860802/brand_logo.jpeg)
Printer Server Installation 2-7
Print Test P
agearameters
The test
pageparameter printout
is a useful
tool that can be used to verify the
connection between the printer server and the printer. The test page contains
th
th
e following
data:
reference when configuring the printer server. The print out contains
default and recently changed information
default and recently changed information
Print
er
sS
erver
nN
ame
MAC Address
D
D
efault remote
pP
rinter
nN
ame Node
Nn
ame
Hardware &
fF
irmware revisions
NOS
iI
nformation
S
S
oftware revision
Network
pP
rotocols
To print the test page, perform the following steps:
1) Verify printer has power and is On-Line.
2) Turn the printer OFF.
3) Disconnect the LAN cable.
4) Turn printer ON.
5) Verify the printer is On-Line.
6) The printout will occur within 90 seconds.
If no printout occurs, make sure printer shows power ON, Ready and On-
Line. Verify printer server installation and try printing test page again.
Line. Verify printer server installation and try printing test page again.
NOTE: If the printer is PCL or text only, the test printout
may contain PostScript commands.
Print Configuration Parameters
To obtain a printout of configuration parameters, enter this software
command:
command:
>
Server>> show server config port port_num [ps]
port_num
The output is directed to the specified port number.
ps
Puts the output in PostScript format.