FARGO electronic S000256 用户手册

RESTRICTED USE ONLY 

 

FARGO Electronics, Inc. 

Symptom(s):  Incorrect output, communications error on PC or Printer, stalling, no response 
from Printer, no job printed, “paper out” error. 

1 

Confirm that the system meets the minimum requirements, as shown here: 

•  IBM-PC or compatible 
• Windows 

95/98/ME/NT/2000/XP 

Pentium

™

 class 133 MHz computer with 

32 MB of RAM or higher 

•  200 MB free hard disk space or higher 
•  ECP Parallel Port with DMA access 

2 

Confirm the correct installation of the Printer Driver.  

a.  Close the software program and check the Printer Driver. 

b.  Reboot the computer. 

c.  Make sure the Printer Driver is installed correctly.  (Note:  Especially if an 

obsolete Driver was recently removed.)  

d.  Be sure the correct setup options within the Printer Driver are selected. 

e.  Confirm that the Driver is current by checking at: www.fargo.com 

3 

Verify the use of an adequate data cable.  

a.  Use a double-shielded parallel cable (no longer than six feet in length).  

(Note:  Data transmission failure can be attributed to a long or faulty 
parallel cable.)  

b.  Use an I-EEE 1284 compliant cable to reduce the effect of radio emissions 

from computers, monitors, and other equipment that may broadcast Radio 
frequency interference (RFI).   

Continued on the next page 

 

Persona

® C25 Card Printer User Guide (Rev. 4.0) 

30