Primera Technology 032910-511262 用户手册

3. When the print is complete, rotate disc 180º and

put the disc back in the input bin and repeat step

2 using the same disc. 

4. When the second run of the print is complete, you should

have a test print that looks similar to the following:

5. Along the Vertical axis of the printed disc, find the number

whose lines touch. For example, in the above illustration,

Enter the number 2 into the Vertical box of the Calibration

window and 0 for the Horizontal axis.

6. Select the OK button. Your images should now be centered

when printed on a disc.
After your selections have been made, close out of the

printer setup window. You are now ready to go to an 

application program and print. All printer driver selections

will stay the same until you change them.

-5  -4  -3  -2  -1   0   1   2   3   4   5

5  4   3   2   1   0  -1 -2  -3  4 -5

Horiz

ontal Calibration

Find and enter the number

whose lines tough

(must be the SAME n

umber)

Ver

tical Calibration

Find and enter the number

whose lines tough

(must be the SAME n

umber)

NOTE:

After printing this image

once, rotate this CD

so the ARROWS point

to the BACK of the printer

and print again.

-5  

-4  

-3  

-2  

-1   

0   

1   

2   

3   

4   

5

5  

4  

3  

2  

1   

0   

-1   

-2   

-3   

-4   

-5

BACK

BACK

511262.qxd  10/15/2009  10:37 AM  Page 43