Ricoh SP 3510DN 用户手册
9.
Press the [ ] or [ ] key to display [Manual Address], and then press the [OK] key.
IPv6 Config.:
Manual Address
Manual Address
10.
Press the [ ] [ ] keys to display [Prefix Length], and then press the [OK] key.
Manual Address:
Prefix Length
Prefix Length
11.
Press the [ ] [ ] keys to enter the value, and then press the [OK] key.
Prefix Length:
(0 - 128) 0
(0 - 128) 0
12.
Press the [ ] or [ ] key to display [Manual Address], and then press the [OK] key.
Manual Address:
Manual Address
Manual Address
13.
Press the [ ] or [ ] key to enter the address, and then press the [OK] key.
Manual Address:
XXXX:XXXX:XXXX:
XXXX:XXXX:XXXX:
Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field,
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.
14.
Use this method to assign Gateway Address.
15.
Press the [Menu] key.
16.
If you are requested to restart the printer, turn off the printer, and then turn it back on.
17.
Print a configuration page to confirm the settings made.
Receiving an IP Address for IPv6 Automatically (DHCP)
• When you use this printer in the DHCP environment with IPv6 protocol, select [DHCP] following this
procedure.
• Consult your network administrator for information about making network settings.
Ethernet Configuration
49