Ricoh MP01 用户手册
MAINTAINING THE PRINTER
3-5
MAINT
AINING
THE PRINTER
9
Lower the square shaped green Toner Cartridge handle into place. The lever
below the Toner Cartridge should snap back into its raised position at this
time.
below the Toner Cartridge should snap back into its raised position at this
time.
j
Close the Front Cover.
Low Toner Condition
When “Add Toner” message displays on the Control Panel, this indicates that the
toner inside the cartridge is getting low. If you want to clear this message and
continue printing, the “Low Toner” selection of the System submenu must be set
to “Continue.” Try redistributing the toner as described below or change the Toner
Cartridge when printing becomes too light.
toner inside the cartridge is getting low. If you want to clear this message and
continue printing, the “Low Toner” selection of the System submenu must be set
to “Continue.” Try redistributing the toner as described below or change the Toner
Cartridge when printing becomes too light.
Sometimes unevenly distributed toner inside the cartridge can cause the “Add
Toner” message to appear. Whenever the message first appears, try using the
following procedure to redistribute the toner inside the cartridge.
Toner” message to appear. Whenever the message first appears, try using the
following procedure to redistribute the toner inside the cartridge.
1
Use steps
1
through
4
under “Replacing the Toner Cartridge” to remove the
Toner Cartridge from the machine.
2
Gently rock the Toner Cartridge
back and forth a few times to
evenly distribute the toner inside.
back and forth a few times to
evenly distribute the toner inside.
3
Use steps
8
through
j
under “Replacing the Toner Cartridge” to replace the
Toner Cartridge in the machine.