Ricoh ISC1032c 用户手册
Placing Originals
14
1
BBBB
Select the original orientation.
Standard orientation
A Make sure
is selected.
90
° turn
A Place the original in the land-
scape orientation, and then
press .
press .
CCCC
Press [OK].
Placing Originals on the
Exposure Glass
Exposure Glass
AAAA
Lift the exposure glass cover or
the ADF.
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully.
O t h e r w is e , t h e A D F c o v e r
might open or be damaged.
O t h e r w is e , t h e A D F c o v e r
might open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30
°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
nal might not be detected cor-
rectly.
❒ Be sure not to press the ADF too
hard; otherwise, the left scale
and the Exposure Glass may be
bent and cause a malfunction.
and the Exposure Glass may be
bent and cause a malfunction.
BBBB
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
the exposure glass. It should be
aligned with the rear left corner.
1.
Reference mark
2.
Left Scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
ADF.
ADF.
ThemisC1_AE_Copy_F_FM.book Page 14 Tuesday, June 21, 2005 9:09 PM