Ricoh DSm730 用户手册

Copying

20

-How to operate

❖ To stop the machine during a multi-

Press the {Clear/Stop} key.

❖ To return the machine to the initial

Press the {Clear Modes} key.

❖ When clearing entered values.

Press the {Clear/Stop} key or [Clear]
on the display.

❖ To check the settings. 

Press the {Check Modes} key.

Use this function to interrupt a long
copy job to make urgently needed
copies.

❒ You cannot use Interrupt Copy

with the scanner function, or when
fax originals are being scanned.

A

Press the {Interrupt} key.
The Interrupt indicator lights.

When the originals stop scanning

A Remove the originals that were

B Press the {Start} key.

Copying starts.

C When copying is complete, re-

D Press the {Interrupt} key again.

The Interrupt indicator goes
out.

E When the display prompts you,

F Press the {Start} key.

❒ The former copy job's set-

tings are restored and the
machine continues copying
from where it left off.

When the machine keeps 
copying

A Place the originals you want to

B Press the {Start} key.

The machine stops the previous
job and starts copying the new
originals.

C When copying is complete, re-

D Press the {Interrupt} key again.

The  Interrupt indicator goes
out.
The former copy job's settings
are restored and the machine
continues copying from where
it left off.

The beeper sounds and an error mes-
sage appears if you leave originals on
the exposure glass after copying.

❒ See p.96 “Tone: Original remains”.

RuC4_AE_Copy-F_FM_forPaper.book  Page 20  Thursday, April 14, 2005  1:21 PM