Ricoh G1168610A 用户手册
Cleaning the Printer
61
Cleaning the Friction Pad
If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case, clean
the pad as follows:
the pad as follows:
A
Lift the paper tray slightly, and then pull it out until it stops. Lift the front
side of the tray, and then pull it out of the printer.
side of the tray, and then pull it out of the printer.
B
Place the tray on a flat surface. When there is paper in the tray, remove
paper.
paper.
C
Wipe the brown part of the friction pad with a soft damp cloth. Then,
wipe it with a dry cloth to remove the water.
wipe it with a dry cloth to remove the water.
❒ Do not use chemical cleaner or organic solvent such as thinner or ben-
zene.