Ricoh LD124c 用户手册
Where to Put Your Machine
143
7
• Close all covers and trays, in-
cluding the front cover and by-
pass tray.
pass tray.
❒ Move the machine carefully. If you
do not, it could result in damage
and stored files might be lost.
and stored files might be lost.
❒ Do not take off the holding stand.
❒ Protect the machine from strong
❒ Protect the machine from strong
shocks. Impact can damage the
hard disk and cause stored files to
be lost. As a precautionary meas-
ure, files should be copied to an-
other computer.
hard disk and cause stored files to
be lost. As a precautionary meas-
ure, files should be copied to an-
other computer.
Power Connection
R WARNING:
R CAUTION:
R CAUTION:
• When the main power switch is in
the stand-by position, the optional
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.
• When you unplug the power cord,
the anti-condensation heaters (op-
tion) turn off.
tion) turn off.
• Make sure the plug is inserted
firmly in the wall outlet.
• Voltage must not fluctuate by more
than 10%.
• The wall outlet shall be installed
near the machine and shall be eas-
ily accessible.
ily accessible.
Access to the Machine
Place the machine near the power
source, providing the clearance areas
shown.
source, providing the clearance areas
shown.
1.
Rear: more than 10 cm (4")
2.
Right: more than 55 cm (21.7")
3.
Front: more than 75 cm (29.6")
4.
Left: more than 10 cm (4")
Note
❒ For the required space when op-
tions are installed, contact your
service representative.
service representative.
• Connect the machine only to
the power source described
on the inside front cover of
this manual. Connect the pow-
er cord directly into a wall out-
let and do not use an
extension cord.
on the inside front cover of
this manual. Connect the pow-
er cord directly into a wall out-
let and do not use an
extension cord.
• Do not damage, break or make
any modifications to the pow-
er cord. Do not place heavy
objects on it. Do not pull it
hard nor bend it more than
necessary. These actions
could cause an electric shock
or fire.
er cord. Do not place heavy
objects on it. Do not pull it
hard nor bend it more than
necessary. These actions
could cause an electric shock
or fire.
• Unplug the power cord from the
wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
• When you disconnect the power
plug from the wall outlet, always
pull the plug (not the cable).
pull the plug (not the cable).
AAE004S
ThemisC1_AE_zentai_pre_FM.book Page 143 Thursday, July 28, 2005 2:13 PM