Philips 5900 用户手册

34

AXIS 5900 User’s Manual

Client/Server Printing

Select Network printer instead of Local Printer in Step 2 above if your 

print server has already been installed by the administrator on another 

computer. Follow the instructions in the Add Printer Wizard to complete 

the installation.

 

Alternative Method for

LPR Printing

If you wish to print over LPR but do not wish to install Print Services for 

Unix you can do this by changing the printing protocol after having 

installed the printer using the Standard TCP/IP method, see “Adding 

Wizard” on page 30 for instructions. 

Once the printer is installed, follow these instructions to change the 

printing protocol:

1. Go to 

Start | Settings | Printers.

2. Double-click the installed printer.

3. Select 

Properties from the Printer menu.

4. Click the 

Ports tab.

5. Click the 

Configure Port button.

6. Click the 

LPR radio button and enter the queue name (PR1, PR2...). 

7. Click 

OK to finish.

If you have not already done so, you should perform the TCP/IP basic 

setup procedures prior to installing a printer for LPR printing.

Preparing for

LPR Printing

In the Control Panel, double-click the Network icon. Select the Services 

tab. If the TCP/IP Printing entry appears, then TCP/IP is already installed. 

Close the Network folder and go on to Installing an LPR printer, below.

First, prepare for LPR printing:

1. Open the 

Control Panel and double-click the Network icon. 

2. Select 

Protocols. 

3. Add 

TCP\IP Protocol. 

4. Select 

Services. 

5. Add 

Microsoft TCP\IP Printing.

•  Make sure that the 

Automatically detect and install my Plug and Play printer checkbox 

is not

 checked

•  Press 

F1 to access the Windows online help system if you need additional help when 

installing a printer/print server using this method.