Ricoh 3590DNP 用户手册
When Multiple Sheets Are Fed at the Same Time
147
4
When Multiple Sheets Are Fed at the Same
Time
Time
Follow the procedure below to cor-
rect a multiple sheet feed problem of
the LCIT.
rect a multiple sheet feed problem of
the LCIT.
A
Adjust the feeding pressure lever
of the LCIT according to the
thickness of the paper loaded.
of the LCIT according to the
thickness of the paper loaded.
Note
❒ The appropriate feeding pres-
sure lever positions according
to the weight of the paper are as
follows.
to the weight of the paper are as
follows.
❒ If multiple sheets of paper are
fed at the same time when the
feeding pressure lever is set to
Standard, set the feeding pres-
sure lever to Thin.
feeding pressure lever is set to
Standard, set the feeding pres-
sure lever to Thin.
❒ If paper is not fed at all when
the feeding pressure lever is set
to Thin, set the feeding pressure
lever to Standard.
to Thin, set the feeding pressure
lever to Standard.
❒ Paper heavier than 127.9 – 209.3
g/m
2
(34.0 – 55.6 lb.) is catego-
rized as thick paper. However,
for B5 JIS paper heavier than
127.9 g/m
for B5 JIS paper heavier than
127.9 g/m
2
(34.0 lb.), set the
feeding pressure lever to Stan-
dard.
dard.
❒ When paper is still not fed prop-
erly even after the feeding pres-
sure lever is adjusted, increase
the paper feeding pressure of
the machine.
sure lever is adjusted, increase
the paper feeding pressure of
the machine.
B
If the problem still persists, take
the paper out and fan it before
loading it again.
the paper out and fan it before
loading it again.
Metric
version
version
Inch ver-
sion
sion
Thick
127.9 – 209.3
g/m
g/m
2
34.0 – 55.6
lb.
lb.
Standard
52.3 – 127.9
g/m
g/m
2
13.9 – 34.0
lb.
lb.
Thin
47.1 – 52.3
g/m
g/m
2
12.5 – 13.9
lb.
lb.
ABQ025S
TPEY080J