Pitney Bowes W680 用户手册

The printer uses Ink Jet Cartridges for printing. You must install a
black only cartridge (W660), or a black and a color cartridge
(W680),  before you can print. To begin:

1. With the printer on, press the On Line key until the

display reads OFF LINE.

2. Open the Transport Door of the printer.

3. Press the Cartridge+ key on the control panel to move

the carriage to the middle of the printer.

4. Remove the color (W680 only) or black cartridge (both

models) from its shipping container by peeling the top
cover off. Be careful not to touch the copper ribbon.

WARNING! The ink in the cartridge may  be
harmful if swallowed. Keep new and used car-
tridges out of reach of children. Discard empty

cartridges immediately.

5. Gently remove the tape covering the ink nozzles on the

print cartridge. Be careful not to touch the copper nozzles.

6. Gently insert the cartridge (color to the right, black to

the left) into the carriage at approximately a 20 degree
angle with copper strip to the bottom and in first. Press
down on the cartridge until it is seated.

Note: The print
cartridge photos in
this section are of
the W680 printer.
The W660 has only
one cartridge.