Pelco cm6800-322x6 用户手册
C1522M-C (2/05)
65
MACRO COMMANDS
Table H provides a description of each macro command and the additional fields required for each command. Refer to the
Macro section
for instructions on programming macros.
Table H. Macro Commands
Command
Description
Specify
Field(s)
GON
Activate an auxiliary.
Auxiliary
Command #
GOFF
Turn off an auxiliary.
Auxiliary
Command #
Auxiliary Notes:
• “Global” includes both internal and external auxiliaries.
• Auxiliaries on the rear panel of the CM6800 Matrix Switcher are activated by global auxiliary numbers 1 and 2.
• “Global” includes both internal and external auxiliaries.
• Auxiliaries on the rear panel of the CM6800 Matrix Switcher are activated by global auxiliary numbers 1 and 2.
CON
Activate a camera auxiliary.
Camera auxiliary
Command #
Camera
Camera
Monitor
Monitor
COFF
Turn off a camera auxiliary.
Camera auxiliary
Command #
Camera
Camera
Monitor
Monitor
SEQ
Start a sequence. A sequence runs continuously until a system operator selects
Sequence
Command #
a different camera, or an event timer starts another sequence or macro.
Monitor
Monitor
SWT
Switch a camera to a monitor.
Camera
Camera
Monitor
Monitor
COPY
Copy a camera view to a monitor.
Monitor to copy from
Command #
Monitor to copy to
Monitor
GO TO
Go to step number specified.
Step
Command #
LOOP
Loop a macro.
0 = loop continuously
Command #
1-999 = loop the specified
number of times
?AUX
Check a local auxiliary; if the auxiliary is active, the next step is executed; if
Local auxiliary
Command #
the auxiliary is not active, the next step is skipped.
?ALM
Check an internal alarm; if the alarm is active, the next step is executed; if
Alarm
Command #
not, the next step is skipped.
?SW
Check whether a camera is displayed on a monitor; if it is, the next step is
Camera
Camera
executed; if not, the next step is skipped.
Monitor
Monitor
STPM
Stop a macro.
Macro
Command #
END
Exit the macro; no further steps are executed. Any macro or sequence started
None
None
by this macro will continue to run.
DON
Displays on-screen text on the specified monitor.
Monitor
Monitor
DOFF
Removes on-screen text from the specified monitor.
Monitor
Monitor
MSWT
Switch a camera connected through the multiplexer.
Camera to switch
◆
Command #
Multiplexer input
Camera
Monitor
Monitor
PIPB
Display multiplexer picture-in-picture view with the
Background camera
◆
Command #
designated camera in the background.
Multiplexer input
Camera
Monitor
Monitor
PIPF
Display multiplexer picture-in-picture view with the
Foreground camera
◆
Command #
designated camera in the foreground.
Multiplexer input
Camera
Monitor
Monitor
◆
For multiplexer functions, the camera number is the number of the video input on the multiplexer. The multiplexer input number is the number
of the video input on the rear panel of the CM6800.
of the video input on the rear panel of the CM6800.