Lexmark MS810dn 用户手册
Custom Bin Names menu
Note: This menu appears only in touch
‑screen printer models.
Use
To
Standard Bin
Specify a custom name for the standard bin.
Bin [x]
Specify a custom name for Bin [x].
Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Millimeters
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
76–216 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase the
width in 0.01
width in 0.01
‑inch increments.
•
216 mm is the international factory default setting. You can increase
the width in 1
the width in 1
‑mm increments.
Portrait Height
3–14.17 inches
76–360 mm
76–360 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
maximum height allowed.
•
14 inches is the US factory default setting. You can increase the
height in 0.01
height in 0.01
‑inch increments.
•
356 mm is the international factory default setting. You can increase
the height in 1
the height in 1
‑mm increments.
Feed Direction
Short Edge
Long Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
maximum width supported in the tray.
Understanding the printer menus
207