Lexmark MS810dn 用户手册
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For non
‑touch‑screen
printer models, press
to confirm.
•
Delete fonts, macros, and other data stored in the flash memory.
•
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, select Continue to clear the message and continue printing. For non
‑touch‑screen
printer models, press
to confirm.
•
If the printer cannot find the requested font, then from the printer control panel, navigate to:
PPDS menu > Best Fit > On
The printer will find a similar font and reformat the affected text.
•
Cancel the current print job.
Paper changes needed
Try one or more of the following:
•
Select Use current supplies on the printer control panel to clear the message and continue printing.
For non-touch-screen printer models, press
to confirm.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Try one or more of the following:
•
Select Continue to clear the message. For non-touch-screen printer models, press
to confirm.
The printer discards any data received through the parallel port.
•
Select Reset active bin to reset the bin for a linked set of bins.
Reattach bin [x]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the specified bin.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
Troubleshooting
302