Lexmark X792dtfe 用户手册
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
58 Input config error
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check if all tray configurations are correct. Remove unnecessary trays if needed.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
59 Incompatible output bin [x]
Try one or more of the following:
•
Remove the specified output bin.
•
Touch Continue to clear the message and continue printing without using the specified output bin.
61 Remove defective disk
Try one or more of the following:
•
Remove the defective printer hard disk.
•
Install a different printer hard disk before performing any operations that require a printer hard disk.
62 Disk full
Try one or more of the following:
•
Touch Continue to clear the message and continue processing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a printer hard disk with larger capacity.
80.xx Fuser near life warning
1
Order a replacement fuser immediately.
2
When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement
part.
part.
3
Touch Continue to clear the message and continue printing.
80.xx Fuser life warning
•
Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the
instruction sheet that came with the replacement part.
instruction sheet that came with the replacement part.
•
Touch Continue to clear the message and continue printing.
Troubleshooting
275