Lexmark Z42 用户手册
•
•
•
•
•
Chapter 4
32
Printer has a paper jam
Remove the paper from the sheet feeder. If the paper is lodged
too far into the printer and can’t be removed:
too far into the printer and can’t be removed:
1
Press the Power button to turn the printer Off.
2
Pull firmly on the paper to remove it.
If you cannot reach the paper because it is too far into the
printer, raise the front cover and pull the paper out.
If you cannot reach the paper because it is too far into the
printer, raise the front cover and pull the paper out.
3
Close the front cover.
4
Press the Power button to turn the printer On.
5
Resend your document to print.
Document prints with mistakes or poor quality
Vertical straight lines are not smooth
To improve the print quality of vertical straight lines in tables,
borders, and graphs:
borders, and graphs:
• Select High (1200 x 1200 dpi) or Maximum (2400 x
1200 dpi) Print Quality from the Document/Quality tab
of Printer Properties. For help, see page 5.
of Printer Properties. For help, see page 5.
• Test the cartridge alignment. For help, see page 24.
• Clean the print nozzles. For help, see page 25.
Characters are missing or unexpected
• Make sure your Lexmark printer driver is selected as the
default printer.
• Your printer may have two-way communication problems.
For help, see page 28.