Lexmark X748de 用户手册
2
1
5
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
6
Reinstall each photoconductor unit.
7
Close the front door, and then close the printer top access cover.
8
From the printer control panel, touch Continue, jam cleared.
Paper jam in the fuser area
1
Open the printer top access cover.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
component, allow the surface to cool before touching it.
2
Open the front door.
Warning—Potential Damage: To avoid overexposing the photoconductor units, do not leave the front door
open for more than 10 minutes.
open for more than 10 minutes.
3
Determine where the jammed paper is located, and then remove it:
a
If the jammed paper is visible under the fuser, then firmly grasp the paper on each side, and then gently pull it
out.
out.
Note: Make sure all paper fragments are removed.
b
If the jammed paper paper is visible at the top paper guide in the fuser assembly, then firmly grasp the paper
on each side, and then gently pull it out.
on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Clearing jams
257