Lexmark 30G0108 用户指南
Paper trays
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
PAPER
IS
LOADED
CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
R
ESET
THE
PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE
SURE
THE
PAPER
TRAY
IS
INSTALLED
CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may
not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation
that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation
that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
2000-sheet tray
These are possible solutions. Try one or more of the following:
T
HE
ELEVATOR
TRAY
IS
NOT
WORKING
PROPERLY
•
Make sure the printer is properly connected to the 2000-sheet tray.
•
Make sure the printer is turned on.
T
HE
PAPER
FEED
ROLLERS
DO
NOT
TURN
TO
ADVANCE
PAPER
•
Make sure the printer is properly connected to the 2000-sheet tray.
•
Make sure the printer is turned on.
Envelope feeder
These are possible solutions. Try one or more of the following:
R
ESET
THE
PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE
SURE
THE
ENVELOPES
ARE
LOADED
CORRECTLY
1
Adjust the envelope support for the length of envelope you are using.
2
For more information, see “Loading the envelope feeder” on page 62.
Troubleshooting
183