Lexmark E462dtn 用户手册
Printing information pages
For more information on printing information pages, see “Printing a menu settings page” on page 29 and “Printing
a network setup page” on page 29.
a network setup page” on page 29.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
.
3
Press the up or down arrow button until Reports appears, and then press
.
4
Press the up or down arrow button until Print Fonts appears, and then press
.
5
Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS
Fonts
, and then press
.
Note: PPDS Fonts appear only if the PPDS datastream has been activated.
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
.
3
Press the up or down arrow button until Reports appears, and then press
.
4
Press the up or down arrow button until Print Directory appears, and then press
.
After the directory list prints, the printer returns to the Ready state.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and the right arrow button while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the up or down arrow button until Prt Quality Pgs appears, and then press
.
The print quality test pages print.
5
Press the up or down arrow button until Exit Config Menu appears, and then press
.
Resetting the Printer
appears briefly, followed by a clock, and then Ready appears.
Printing
69