Lexmark 430 用户手册
C
HECK
THE
PAPER
TYPE
SETTING
Make sure the paper type setting matches the paper loaded in the tray.
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
M
AKE
SURE
C
OLOR
S
AVER
IS
SET
TO
O
FF
Color Saver may be set to On.
T
HE
TONER
MAY
BE
LOW
When 88 <color> Cartridge Low appears or when the print becomes faded, replace the toner cartridge.
A
TONER
CARTRIDGE
MAY
BE
DEFECTIVE
Replace the toner cartridge.
T
HE
IMAGING
KIT
MAY
BE
WORN
OR
DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black and
color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
Repeating defects
)
)
)
)
R
EPEATING
MARKS
OCCUR
REPEATEDLY
ONLY
IN
ONE
COLOR
AND
MULTIPLE
TIMES
ON
A
PAGE
Replace the developer unit if the defects occur every 43.9 mm (1.7 in.)
Replace the imaging kit if the defects occur every:
•
34.6 mm (1.4 in.)
•
94.2 mm (3.71 in.)
Troubleshooting
145