Lexmark 24Z0653 用户手册
For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering
machine, telephone, or other telecommunications equipment to the printer.
machine, telephone, or other telecommunications equipment to the printer.
1
Connect one end of the telephone cable that came with the printer to the printer LINE port
2
Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone
wall jack.
wall jack.
Note: Your telephone adapter may look different than the one shown. It will fit the wall jack used in your
location.
location.
Setting the outgoing fax or station name and number
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > Fax Settings > Analog Fax Setup.
3
In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4
In the Fax Number or Station Number field, enter the printer fax number.
5
Click Submit.
Setting the date and time
You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may
have to reset the date and time.
have to reset the date and time.
1
Type the printer IP address in the address field of your Web browser.
If you do not know the IP address of the printer, then you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Security > Set Date and Time.
Faxing
127