Lexmark 1200 用户手册

下载
页码 208
72
Chapter 5: Paper handling
Paper sizes
Your printer supports a wide variety of paper sizes. Some 
paper sizes feed from the trays short edge first, and others 
feed long edge first. This affects the print speed, as well as 
the proper positioning of letterhead or other preprinted 
paper in the trays. See the ”Paper size specifications” table 
on page 73 for details. Refer to the 
Setup Guide for illustra-
tions of proper paper orientation in the trays.
The printer determines the size paper loaded in the trays 
by the position of the rear paper guide. Since the printer 
can only recognize A3 and B4 size paper or 11x17 and legal 
size paper, you must decide which paper sizes you want 
your trays to support. Then choose the appropriate setting 
from the Size Detection menu item. You can still load the 
paper sizes you don’t select in the multipurpose feeder. 
Paper source specifications
Source
Media
Sizes
Weight
Capacity 
1
Print side
Standard tray
(Tray 1)
Paper
Transparencies
A4, A5, JIS B5, JIS B4, A3, 
letter, legal, 11x17 
2
60–90 g/m
2
(16–24 lb)
250 sheets 
50 transparencies
Face down
Optional drawers
(Tray 2 or 3)
Paper only
A4, A5, JIS B5, JIS B4, A3, 
letter, legal, 11x17 
60–90 g/m
2
(16–24 lb)
250 sheets
Face down
Multipurpose 
feeder 
Paper
Transparencies
Labels
Envelopes
Card stock
Supports any odd-size paper 
within the following 
dimensions:
Minimum: 90 x 148 mm
(3.5 x 5.8 in.)
Maximum: 297 x 432 mm
(11.7 x 17 in.)
Select Universal from the MP 
Feeder Size menu when 
feeding odd-size paper.
60–135 g/m
2
(16–36 lb)
Card stock:
163 g/m
2
(90 lb)
100 sheets 
30 transparencies
30 label sheets
15 envelopes
Face up
1
 For 20 lb paper, unless otherwise noted.
2
 Use the Size Detection menu item in the Paper Menu to configure your trays to support either B4 and A3 size paper 
or legal and 11x17 size paper. See page 21 for more information.