Konica Minolta Network Printer 用户手册

Key Operator Mode 9-17

Key Operator Mode

ECM (Electronic Copy Monitor) Function Setting [4] (continued)

E.C.M. Function Setting [3]

Use this function to turn ECM On or Off and to select whether the printer will stop at the 
time the count limit is reached, or after the print job in progress is completed.

ECM Setting Menu Screen

ECM Function Setting Screen

1 Press [

HELP

] to display the Help Screen, then touch 

. 

Enter the 4-digit Key Operator password, then touch 

 to display the Key Operator 

Mode Screen. (See note 1.)

2 Touch 

. The ECM Master Key Code Screen displays, if a code 

is required.

3 Enter your 8-digit ECM master key code, then touch 

 to display the ECM Setting 

Menu Screen. (See note 2.)

4 Touch 

. The ECM Function Setting Screen will be displayed.

5 Touch 

 to activate ECM or touch 

 to de-activate ECM.

The selected key will be highlighted.

6 Touch 

 to stop the machine at once if the print limit is reached.

In this case, print conditions selected for the job in progress will be cleared. To continue 
the job using the same user password, change the print limit of the password or clear 
the print count.
Touch 

 to stop the machine after the job in progress is completed, if print limit is 

reached.
Touch 

 only to display a warning message if print limit is reached.

The selected key will be highlighted.

7 Touch 

 to complete the setting and return to the ECM Setting Menu Screen. If other 

ECM setting changes are required, touch the desired key, from [1]~[3].

8 Touch 

 to restore the Key Operator Mode Screen.

9 Touch 

 to return to the Basic Screen and perform printing operations.

NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.

2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.