Konica Minolta IP-011 用户手册

IP-011 Printer Controller  4-13

● 

Select [1. Setting]-[5. Test Print] on the Printer Setting screen to display the Test Print Setup screen.

Items of the Test Print Setup screen are as follows:

Press [1] to print the Demo/Configuration Page immediately.

Items of the Demo/Configuration Page are as follows:

•

Version information (Printer Driver/Network card: only when the KN-304 is attached)

•

Current settings (Engine Destination / Resolution / Print Speed / Default Paper Size / Default

Paper Tray  / Finisher / Optional Paper Tray / Timeout Setting)

•

Paper (Tray 1 / Tray 2 / Tray 3 / Tray 4 / Bypass Tray)

•

Device status (Controller Memory / Free Memory)

•

Miscellaneous (Total Page count / Printer page count)

Press [2] to print the NIC Configuration Page immediately. [2. NIC Configuration Page] is displayed

only when the KN-304 is attached.

Refer to the operating manual of the KN-304 for details of the NIC Configuration Page.

● 

Select [1. Settings]-[6. CMD Error Page]  on the printer mode basic screen to display the CMD Error page Setup menu.

Items of the CMD Error page Setup menu are as follows and the factory default is [1.OFF].

When [1] is selected, a CMD error page is not printed in the case that the printer command error occurs.

When [2] is selected, a CMD error page is automatically printed in the case that the printer command error

occurs.

● 

Select [1. Settings]-[7. Error Page]  on the printer mode basic screen to display the Error page Setup menu.

Items of the Error page Setup menu are as follows and the factory default is [1.OFF].

When [1] is selected, an error page is not printed in the case that the I/O timeout error occurs.

When [2] is selected, an error page is automatically printed in the case that the I/O timeout error occurs.