Konica Minolta Pi3505e 用户手册

Installing a Windows Printer Driver

Pi3505e Printer Driver

2-7

The printer driver requires setting of items that are common to all print 
jobs, including the port to which the printer cable is connected and 
optional devices configured with the machine. These settings must be 
made using property sheets available from the Properties command after 
the printer driver has been installed or whenever the operating 
environment is changed.

The most common settings were made when the printer driver was 
installed, meaning that you do not usually bother to change them. Some 
items must, however, be changed in the following cases.

For details of “Using PCL Printer Driver Properties Tabs” on page 4-1.

Note
Refer to the User Manual on the controller CD-ROM for information 
about how to actually configure settings.

You want to add a comment to distinguish the printer 
from others

You want to share the machine with other computers 
connected to the same network (this setting must be 
made on the computer directly connected to the 
machine)

The computer’s connecting port has been changed
You want to change the conditions for the display of a 
timeout error
You want to designate a port to which the machine is 
connected via a network (this setting must be made on 
a computer connected to the machine via a network)

You want to restrict use condition of printer.
You want to change settings in spool condition.
You want to change OS-dependent settings.

This setting is not related to printing.

You want to restrict access to the machine.
You want to check the accounts of the machine users.