Konica Minolta C250P 用户手册

Installation and operation precautions

C250P

1-10

WARNING
This is a Class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.

This device must be used with a shielded network (10 Base-T/100 Base-TX) 
cable and a shielded parallel cable. The use of non-shielded cables is likely 
to result in interference with radio communications and is prohibited under 
CISPR rules and local rules.

This is a digital machine which operates using a laser. There is no possibility 
of danger from the laser provided the machine is operated according to the 
instructions in this manual.

Since radiation emitted by the laser is completely confined within protective 
housing, the laser beam cannot escape from the machine during any phase 
of user operation.

This machine is certified as a Class 1 laser product: This means the machine 
does not produce hazardous laser radiation.

Maximum Average Radiation Power: 8.0 μW at the laser aperture of the print 
head unit.

Wavelength: 775-800 nm

This product employs a Class 3B laser diode that emits an invisible laser 
beam.

The laser diode and the scanning polygon mirror are incorporated in the print 
head unit.

The print head unit is NOT A FIELD SERVICE ITEM:

Therefore, the print head unit should not be opened under any circumstanc-
es.