Konica Minolta C250P 用户手册
Control panel settings
4
C250P
4-49
O.W. Priority
Select the priority setting for overwriting temporary data when the security
kit is installed. Select “Encryption” to perform high-level security encryption
processing. However, data overwriting with encryption of the HDD differs de-
pending on whether “Mode 1” or “Mode 2” is selected. Normally, “Encryp-
tion” is selected.
kit is installed. Select “Encryption” to perform high-level security encryption
processing. However, data overwriting with encryption of the HDD differs de-
pending on whether “Mode 1” or “Mode 2” is selected. Normally, “Encryp-
tion” is selected.
If “Overwrite” is selected, data overwriting with encryption of the HDD is per-
formed depending on whether “Mode 1” or “Mode 2” is selected. Select this
setting when the format of the data written to the HDD is considered impor-
tant.
formed depending on whether “Mode 1” or “Mode 2” is selected. Select this
setting when the format of the data written to the HDD is considered impor-
tant.
1
In the O.W. Priority screen, select “Encryption” or “Overwrite”.
2
When the “Encryption” or “Overwrite” setting is changed, follow the in-
structions in the screen to restart the machine.
structions in the screen to restart the machine.
3
If an encryption key error appears, select the parameter from the Ad-
min. Setting screen to format the HDD.
min. Setting screen to format the HDD.
!
Detail
When the “Encryption” or “Overwrite” setting is changed, the HDD must
be formatted.
be formatted.
2
Reminder
When turning the machine off, then on again, wait at least 10 seconds to
turn the main power switch on after turning it off. The machine may not
operate correctly if it is turned on immediately after being turned off.
turn the main power switch on after turning it off. The machine may not
operate correctly if it is turned on immediately after being turned off.