Konica Minolta C250P 用户手册

Setting up the printer driver

C250P

2-4

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the 
printer driver onto the computer being used.

Setup the printing system as described below.

Connect this machine to a computer. (Refer to “Connecting to a com-
puter” on page 1-43.)

Install the printer driver. (Refer to “Installing the printer driver” on 
page 2-5.)

–

Installation of the printer driver may differ depending on the con-
nection method used with this machine in addition to the operating 
system of the computer and the type of printer driver being used.

–

To update an existing printer driver, delete the existing printer driver 
first. For details, refer to “Uninstalling the printer driver” on 
page 2-20.

When using a network connection, set up the network. (Refer to “Set-
ting up network printing” on page 2-33.)

–

As necessary, set the interface timeout settings and parallel inter-
face mode (Compatible, Nibble, or ECP) in the I/F Setting menu 
from the control panel. When using a parallel or USB port, you must 
select the port being used. For details, refer to “Admin. Setting” on 
page 4-38.

Check the setup by printing a test page. (Refer to “Test printing” on 
page 2-31.)

Install the screen fonts.

–

The User Software CD-ROM and PostScript Printer Driver CD-ROM 
contain the Latin TrueType fonts as the screen fonts.

–

Install the screen fronts after adding the operating system standard 
fonts. For details, refer to Help of the operating system.

–

The screen fonts are located in the Screenfont or Screenfonts folder 
on the CD-ROM.

–

To install the Macintosh fonts, install the fonts after decompressing 
them.