Konica Minolta C10P 用户手册

Printing 
takes too 
much time.

The printer is set to a 
slow printing mode 
(for example, thick 
stock or transpar-
ency).

It takes more time to print with special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.

The printer is set to 
power saving mode.

It takes time for printing to start in 
power saving mode. If you do not want 
to use this mode, disable it. (

SYSTEM 

DEFAULT

/

ENERGY

 

SAVER MGT 

menu)

The job is very com-
plex.

Wait. No action needed.

The printer memory is 
insufficient.

Add more memory.

A toner cartridge for a 
different region is 
installed (

X INCOR-

RECT

 is displayed in 

the message win-
dow).

Install a correct KONICA MINOLTA 
toner cartridge approved for your spe-
cific printer.

Blank pages 
are printed.

One or more of the 
toner cartridges are 
defective or empty.

Check the toner cartridges. The image 
will not print correctly or not at all, if a 
cartridge is empty.

The wrong media is 
being used.

Check that the media type set in the 
driver matches the media loaded in the 
printer.

Printer 
returned to 

IDLE

 before 

the configu-
ration menu 
was 
changed.

The printer was in the 
configuration menu 
structure without a 
selection being made 
within two minutes.

When in the configuration menu struc-
ture, select your choice within 2 min-
utes.