Lg Electronics 47WV30BR 用户手册

 

y

You can control several products at a time by connecting them to a single PC.

 

y

In the Option menu, Set ID must be between 1 and 255 without being duplicated.

Connect the RS-232C cable as shown in the picture.

 

y

The RS-232C protocol is used for communication between the PC and product. You can turn the 
product on/off, select an input source or adjust the OSD menu from your PC. This monitor features 
two RS-232 ports. One input and one output. This allows you to daisy-chain monitors without having 
to use a splitter box.

Set 1 

Set 2 

Set 3

Set 4 

PC

RS-232C Cable

15 mm or 

less

 

y

Baud Rate : 9600 buad Rate (UART)

 

y

Data Length : 8 bit

 

y

Parity Bit : None

 

y

Stop Bit : 1bit

 

y

Flow Control : None

 

y

Communication Code : ASCII code

 

y

Use a crossed (reverse) cable

8-Wire Configurations (Cross-over RS-232C cable)

 

y

Use RS-232C cables as shown in the picture.

 

y

If a cable bigger than the ones shown in the picture is used 

in the connector, the connection may not be flawless due to 

interference between the cables.

 

y

Pin 1 of RS-232C Out should be connected with Pin 4 of RS-

232C In.

PC

Set

D-Sub 9 

(Female)

D-Sub 9

(Female)