Konica Minolta 7135 用户手册

Initial settings are the settings that display automatically when the copier is powered
on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed.
These settings can be changed by the Key Operator, as shown in this section.
Initially (i.e., at installation), the Basic Screen displays the following conditions to meet
Energy Star requirements: 

 

Copy Mode

: 1-1

Copy Density

: AES

Lens Mode

: 1:1

Paper Tray

: APS 

Output Mode

: offset sort

When Initial settings are changed by the Key Operator, the new initial settings display
when the copier is powered on, when Auto Reset timer is activated, or when [AUTO
RESET] key is pressed. 

The following initial settings can be changed by the Key Operator:

Copy mode

: [RADF; 1-1, 1-2, 2-2, 2-1] 

Copy density

: [AES; manual] 

Lens mode

: [AMS; ratio 0.25~4.00] 

Paper tray

: [APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray]

Output mode

: [Exit tray 1, 2, 3, 4; Rotation On/Off; Non-sort, Sort,

Group, Staple; Staple location] (machine with Finisher)
[Exit tray 1, 2; Group, Rotation sort, Rotation group;
Rotation On/Off] (machine with Inner tray)
[Group, Rotation sort, Rotation group; Rotation On/Off]
(machine without Finisher)

Non-Image
   Area Erase

: [Oblique erase, Rectangular erase; Original density]

Setting procedures are described on the following pages.

The most commonly-used settings are established at installation. Before
changing any of the copier settings, be sure that you understand the
overall and long-range effect of the change. 

KRDS Host

Density Shift

Application 

Customize

List Print

Memory 

Switch

Power Save

Touch Panel 

Adjustment

Weekly 

Timer

Key Operator 

Data

Panel Contrast

Paper Type

Lock Job 

Memory

E.C.M.

Preset Key

Copier Initial

System Initial 

Key Operator 

Mode