Konica Minolta 7135 用户手册
[2] Copier Initial (continued)
11-10
[3] Magnification
Set the magnification ratio you initially want to display after the user turns the power
on or after Auto/Reset restores the Initial settings.
on or after Auto/Reset restores the Initial settings.
NOTICE:
This setting should not conflict with the Initial setting for Paper Tray. For
example, if APS is selected for the initial paper tray setting, a ratio setting
other than AMS will be ignored.
example, if APS is selected for the initial paper tray setting, a ratio setting
other than AMS will be ignored.
❒ Setting options: AMS; 1.00; ratio 0.25~4.00
Key Operator Mode Screen
Copier Initial Setting Screen
Magnification Initial Setting Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3.
Magnification to display the Magnification Initial Setting Screen.
The default setting is 1.00.
The default setting is 1.00.
2 Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already displayed, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or
enter a 3-digit ratio using the keypad on the Control panel.
To select AMS, touch AMS.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or
enter a 3-digit ratio using the keypad on the Control panel.
To select AMS, touch AMS.