Konica Minolta 7135 用户手册

Use this feature to check malfunctions of the LCD touch screen due to the shift in
position of the touch sensor.

❒ When the Control Panel Adjustment Screen does not display in step 2, press one from the

control panel keypad [0] ~ [9].

Key Operator Mode Screen

Touch Panel Adjustment Screen

1 Touch [10] Touch panel adj. on the Key Operator Mode Screen to display the Touch 

Panel Adjustment Screen.

2 Touch the “+” indication at the upper right corner, then lower left corner on the screen. 

The present coordinates will be displayed in the message area of the screen.

When touching the “+” indications, it is recommended that you use a sharp
point such as a pencil to be more accurate.

3 Check that the X coordinate and Y coordinate displayed in the first line of the message 

area fall within the standard value displayed in the second line.

4 Touch the CHECKs at the upper left and lower right corners on the screen to check if 

the buzzer tone functions normally.

5 If the coordinates fall out of the range of the standard value in step 3, or the buzzer 

tone does not sound in step 4, repeat the adjustment procedure from 2 to 4.

6 Press [START] on the control panel to complete the setting.