Konica Minolta 4650EN 用户手册
Replacing Consumables
157
11
Use
DATE
on the
SYS DEFAULT MENU/CLOCK
menu to set the date,
and use
TIME
on the
SYS DEFAULT MENU/CLOCK
menu to set the
time.
Replacing the Fuser Unit
When the time to replace the fuser unit is reached, the message
FUSER
UNIT/END OF LIFE
appears. Printing can continue even after this mes-
sage appears; however, since the print quality is reduced, the fuser unit
should be replaced immediately
should be replaced immediately
1
Turn off the printer.
Note
There are extremely hot parts within the machine. Before replacing the
fuser unit, wait about 20 minutes after turning off the machine, and then
check that the fusing section has reached room temperature, otherwise,
you may get burnt.
fuser unit, wait about 20 minutes after turning off the machine, and then
check that the fusing section has reached room temperature, otherwise,
you may get burnt.
2
Pull the lever, and then open the
right side cover.
right side cover.
"
Before opening the right side
cover, fold up Tray 1.
cover, fold up Tray 1.