KYOCERA FS-1020D 用户手册

Special Paper

4-7

4.3 Special Paper

The following types of special paper can be used:
• Transparency (overhead projection film)
• Adhesive-backed label paper
• Envelopes
• Colored paper
• Preprinted paper
• Recycled paper
Use paper that is sold specifically for use with copiers (heat-fusing type). 

Transparency, label paper, and envelopes should not be placed in the paper 

cassette; they must be fed from the MP tray and delivered in the face up 

stack. 
Since the composition and quality of special paper vary considerably, 

special paper is more likely than white bond paper to give trouble during 

printing. No liability will be assumed if moisture and so forth given off 

during printing on special paper causes harm to the machine or operator.

Specifications for each type of special paper are given below.

4.3.1 Transparency (overhead projection film)

Transparency must be able to withstand the heat of fusing during the 

printing process. It should satisfy the conditions in.

If transparency jams frequently, pull the top of the sheet very gently as it 

leaves the printer.

Note

Tolerance of heat

Must tolerate at least 190°C (374°F)

Thickness

0.100 to 0.110 mm (3.9 to 4.3 mils)

Material

Polyester

Dimensional accuracy

±0.7 mm (±0.0276 in)

Squareness of corners

90° ± 0.2°