Seiko Instruments LTP F Series 用户手册

(1) Remove the protection tape that is attached to the fixing blade unit as shown in Figure 9-2.

Handle with care the fixing blade edge after removing the protection tape.

(2) Mount the fixing blade unit to the autocutter unit with 2 screws.

Recommended screws:  JIS 1188 pan head machine screw (small round type) M2

×4.

Be careful not to damage the platen during installation.

Figure 9-2  Fixing Blade Unit

Figure 9-3  Installing Autocutter Unit (Fixing blade unit)

Protection tape

Positioning hole

Screws