OKI 7100 用户手册

OPERATION > 135

You don't need to carry out all the steps above every time you wish to 
print an overlay. If the files you wish to use have already been 
downloaded to the printer, you only need to carry out step

 

(c)

 

above. 

This is common in many office environments, where someone has 
already set up all the necessary files on the printer, and all the other 
users only have to switch on the required settings in the printer driver.

CREATING DOCUMENTS TO USE AS OVERLAYS

An overlay can be created in any software application that can handle 
logos, letterheads, forms, etc. and can print to file.

To create a print (PRN) file:

From inside your application program, choose [File] then 
[Print].

Ensure that the "Print To File" option is switched on in your 
application's Print dialogue box.

Depending on the application, you may need to select your OKI 
printer model, and then click [Properties…]. This should open 
the printer driver settings.

>

The internal hard disk must be fitted to the printer to allow for 
spooling of the print job before final printing.

>

If the hard disk memory is insufficient for the spooled data, 

FULL is displayed and only one copy printed.

>

If the software application being used has a collate print option, 
this must be turned OFF for overlay to operate correctly.

>

An overlay may consist of more than one component file.

Important: Please ensure that you are using the Oki PCL driver to do 
this.