OKI 5300n 用户手册
WINDOWS 9X DIFFERENCES > 37
Proof and print feature
This feature allows you to send multiple copies of a document to print
but only print the first copy so that you can check the output quality
before printing the rest.
but only print the first copy so that you can check the output quality
before printing the rest.
SENDING THE DOCUMENT TO PRINT
From your application’s Print dialogue, select the number of copies
you need, and then click the
you need, and then click the
Properties button.
1.
In the driver window, on
the
the
Job Options tab, select
Proof and Print (1).
2.
In the small pop-up
window which appears,
enter a name for this print
job (16 characters
maximum) and a 4-digit
PIN using any combination
of digits from 0 to 9, and
click
window which appears,
enter a name for this print
job (16 characters
maximum) and a 4-digit
PIN using any combination
of digits from 0 to 9, and
click
OK.
3.
Click
OK again to close the
driver window, and again to close your application’s Print
dialogue.
dialogue.
The document will be sent to the printer’s hard disk but only the first
copy will print.
copy will print.
See Chapter “Printer Settings in Windows” for information on printing
the remaining copies.
the remaining copies.
NOTE
With both PS and PCL drivers, this feature requires the optional internal
hard disk to be fitted and enabled in the Start/Settings/Printers/
Properties/Device options dialogue.
hard disk to be fitted and enabled in the Start/Settings/Printers/
Properties/Device options dialogue.
1