OKI 110 用户手册

26  -  C110 User’s Guide

Eject All Toner:Used when replacing all toner cartridges at the 
same time.

 

Select this mode, and then click the Rotate Toner button to switch 
the printer to the Eject All Toner mode.

(Refer to “Replacing All Toner Cartridges at the Same Time” on 
page 52.)

" P/H Clean Up—Click the button to switch the printer to the P/H Clean 

Up mode.

 

Print Head Cleanup mode is a mode that allows the user to clean the 
print head window more easily. The print head window is not cleaned 
automatically.

(Refer to “Cleaning the Print Head Window” on page 73.)

The printer can also be switched to any of these operation modes 
by pressing the Rotate Toner key on the printer.

 

Refer to “The Rotate Toner KEY” on page 12.

Set Default

" Apply—Click to send the settings specified for "Toner Low Message", 

"Toner Out Stop", "Energy Save Time" and "Auto Continue" to the 
printer.

" Toner Low Message—Specifies whether a printer indicator blinks or a 

warning message appears in the status display box of the Remote 
Panel Utility when toner is about to run out. If Off is selected, neither 
of these notifications appear when the toner is about to run out.

" Toner Out Stop—Specifies whether or not printing stops when the 

toner becomes empty.

" Energy Save Time—Set time to enter Energy Save mode when no 

operation is performed.

" Auto Continue—If Off is selected, the next print job will not be per-

formed if a paper size error occurred in the printer, unless the Clear 
key is pressed to cancel the error.

 

If On is selected, the next print job is sent if a paper size error 
occurred in the printer, the error is automatically cancelled, and the 
next print job is performed.

Calibration

" Start—Performs the calibration operation.