OKI 14i 用户手册
English
User’s Guide
11
Level 2 menu settings
Category
Item
Parameter
Explanation
Print Mode
Mode
600
V1200 (600 x 1200)
300
Printing resolution setting in dots per inch (dpi).
Auto Operation
Autocont
Off
On
The printer can recover from a memory overflow or print overrun automatically after about
15 seconds if set to ON, otherwise Recover key has to be pressed.
15 seconds if set to ON, otherwise Recover key has to be pressed.
Wait Time
Off
On
5 sec
6 sec
90 sec
300 sec
Most computer software will send a form feed character at the end of the print job so that
the last page is ejected. If it does not, the printer can automatically eject the last page after a
period of inactivity.
the last page is ejected. If it does not, the printer can automatically eject the last page after a
period of inactivity.
Man Time
60 sec
Off
30 sec
This setting applies to Adobe PostScript operation only. It determines how long the printer
will wait for a sheet to be inserted in the manual paper feeder.
will wait for a sheet to be inserted in the manual paper feeder.
Darkness
Control
Control
Darkness
0; +1; +2; -2; -1
Adjusts internal settings to compensate for variations in humidity. In environments of high
temperature and humidity if some feint printing occurs, increase setting. In environments of
low temperature and humidity if black or white spots appear, decrease setting.
temperature and humidity if some feint printing occurs, increase setting. In environments of
low temperature and humidity if black or white spots appear, decrease setting.
Power Saving
Power
Saving
Saving
0 sec
8 min
Disable
When this function is active, power to the fuser is turned off to conserve energy. A slightly
longer delay will occur before the next job prints, to allow the fuser to warm up again.
longer delay will occur before the next job prints, to allow the fuser to warm up again.
Low Toner
Low Tnr
On
Off
This setting determines whether the printer will remain on-line (ON) or go off-line (OFF)
when the toner cartridge has only enough toner left for about 100 pages.
when the toner cartridge has only enough toner left for about 100 pages.
Toner Saving
Toner
Disable
Medium
Light
Clearable
Warnings
Warnings
Clr Wrng
On
Job
Many messages which may appear from time to time can be cleared by pressing the Recover
key if this function is ON. If it is set to JOB, the host computer may be able to clear such
warnings by downloaded commands. This setting is not relevant when using PostScript
emulation.
key if this function is ON. If it is set to JOB, the host computer may be able to clear such
warnings by downloaded commands. This setting is not relevant when using PostScript
emulation.
Error Report
Erreport
Off
On
In PostScript mode this setting determines whether an error report will be printed when an
error has occurred.
error has occurred.
Parrallel I/F
Speed
High
Medium
Most modern PCs can download data at very high speed. If data corruption is experienced
on printed pages, reduce the setting to MEDIUM.
on printed pages, reduce the setting to MEDIUM.
Bi-Dirct
Enable
Disable
The printer can send status information back to the computer. A printer interface cable
compliant with IEEE1284 is needed to use this feature.
compliant with IEEE1284 is needed to use this feature.