Olivetti PG L245 用户手册

Replace toner

 

Clean printer

Toner has run out in the toner container. Replace the toner container using a new 
toner kit. The printer does not operate when this message is displayed.

 

Set paper

 

Press GO

The MP tray is out of paper. Load paper and press [GO]. (Note that feeding the 
paper having a paper size which does not match the current paper size from the 
MP tray can cause paper jam.)

Toner low 

 

Toner is running low. Replace the toner container using a new toner kit.

 

 

Top tray 

 

paper full

The top tray has become full. You must remove all printed pages from the top tray. 
When the printer detects that the top tray is empty again, the printer will continues 
printing into the top tray.

Unknown Toner 

 

Installed

The toner container is not original. Use of original Olivetti toner kits is highly 
recommended to prevent printer trouble and ensure the long life of the printer.

 

If a toner container which indicates Toner low or Replace toner Clean 
printer

 is installed to other printers of the same model, the message indicating 

Unknown Toner Installed

 may be displayed. But, in this case, this toner 

container can be used.

USB memory err## 

 

Press GO

An USB flash memory error has occurred. Look at the error code given in place of 
##

 and refer to Storage Error Codes on page 4-9. To ignore the USB memory error, 

press [GO].

USB mem. removed

 

Press GO

The USB flash memory is accidentally removed from the printer. To ignore the USB 
memory error, press [GO]. The message display returns to Ready.

 

Virtual mailbox

 

 full

The storage area in the Microdrive for the virtual mailboxes is full. Print out 
accumulated jobs in the virtual mailboxes.

 

Warning

 

image adapt

Printing job cannot be done in current resolution because there is not enough 
internal memory. Try adding more memory or changing resolution.

 

Warning

 

low memory

The printer’s internal memory is running low due to too many numbers of fonts and 
macros downloaded. Try deleting unnecessary fonts and macros.

 

† Messages separated by ‘( )/( )’ are displayed alternately.
†† After this error has happened, page protect mode will be automatically turned on. To maintain 

optimum use of memory during printing, we recommend you manually turn off page protect mode.