IBM QMS 1725E 用户手册
Installing the Software
4-5
Connecting to an Ethernet Network
installation software, and
destination
is the full pathname of
the directory in which the software will be installed (for
example,
example,
a:install a: c:\crownadm
↵
).
»
Note: You cant install the utilities by copying files from the disks. You
must run the installation program.
3
When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
disk drive and store it in a safe place.
4
Skip to “Configuring the Interface,” later in this chapter.
Macintosh System
1
With the Macintosh on, insert the CrownAdmin for Macin-
tosh disk in the disk drive.
tosh disk in the disk drive.
2
If necessary, double-click the Utilities disk icon to open the
disk window.
disk window.
3
Copy the CrownAdmin file by dragging the CrownAdmin
icon from the Utilities window to the Macintosh hard disk.
icon from the Utilities window to the Macintosh hard disk.
4
When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
disk drive and store it in a safe place.
5
Skip to “Configuring the Interface,” later in this chapter.
OS/2
This is a two-part procedure. Some of the utilities are installed on the
print server and others on the workstation.
print server and others on the workstation.
»
Note: For information on installing the utilities directly on the workstation,
(bypassing the print server and printing directly to the printer), see the
QMS CrownNet Interface System Administrators Guide.
Print Server
1
At the LAN Manager/LAN Server print server, log into the net-
work as the system administrator.
work as the system administrator.
2
Insert the CrownNet Manager for OS/2 disk in the disk drive.