IBM QMS 1725E 用户手册

Configuring the Interface

4-11

Connecting to an Ethernet Network

Skip to “Configuring the Network,” later in this chapter.

LAN Manager/LAN Server

One unique printer name is broadcast to the network. Use
the Administration/Communications/Network 2/CrownNet/
Lan Manager/Printer Name menu to enter the name of the
printer.

Note: The name can be up to 16 characters long.
Spaces and lowercase characters are not allowed. However, Underscore

characters (_) are allowed to simulate multiword names (for example,

PRODUCT_MKTG).

Skip to “Configuring the Network,” later in this chapter.

NetWare

If you want something other than the default settings, use the follow-
ing procedure to name the file and print servers. These names must
be unique.

Note: In CrownAdmin, the printer shows up as

QMS-

xxxx

-Print-

System-

hardwareaddress

, where

xxxx

is the printer model number

and

hardwareaddress

is the printers hardware address as found on

the printer start-up page.

In the Administration/Communications/Network 2/CrownNet/
NetWare/Config PServer/File Srv Name[1], File Srv Name[2],
and File Srv Name[3] menus, enter the name of the target file
server.

Note: The three File Srv Name[x] menus allow you to identify 1 file server

with a name up to 48 characters long. (Up to 16 characters can be

entered in each of the three menus). You cannot use these three menus

to identify three file servers.

Spaces and lowercase characters are not allowed within file server

names. However, underscore characters (_) are allowed to simulate

multiword names (for example, PUBS_SERVER). At the printer control

panel only, a space must be used following the last character of the file

server name to end the name.