Genicom 140 TM 用户手册
Zebra XiII Printer User’s Guide
107
RS-232 Interconnections
The Zebra XiII printer is configured as Data Terminal Equipment (DTE).
Figure 24 illustrates the internal connections of the printer’s RS-232 con-
nector.
Figure 24 illustrates the internal connections of the printer’s RS-232 con-
nector.
Figure 25 illustrates the connections required to interconnect the XiII printer
with the standard 9 pin serial port connector on a PC.
with the standard 9 pin serial port connector on a PC.
Note:
If using a 9 pin to 25 pin adapter plug attached to the computer, use a null
modem cable between the adapter plug and the Zebra printer.
modem cable between the adapter plug and the Zebra printer.
To connect the printer to other DTE devices with DB-25 connectors (such
as the serial port of a PC), an RS-232 null modem (crossover) cable should
be used.
as the serial port of a PC), an RS-232 null modem (crossover) cable should
be used.
Figure 24. RS-232 Connections
xi2appa Page 107 Tuesday, April 23, 1996 1:05 PM